The device is designed to measure torque while winding the rubber motor of F1D, F1M and F1L class models.
The torque meter shows the value in real time on a tilting display. The unit of measurement is g·cm.
How to use
Securely fasten the base with two screws to a fixed surface, such as a table, a stand or a flight box. Carefully snap the meter onto the base. Connect a power source, for example a power bank. Right after connecting the power, try not to move the device. This is necessary for the initialization to complete correctly. Once the screen shows a value close to zero, the device is ready for use.
Put one end of the rubber loop on the meter's hook and the other end on the winder's hook, and start winding the motor. While winding, the meter displays the torque value in real time. The screen tilt angle can be adjusted within a 45-degree range.
Transportation and storage
The meter is a sensitive instrument that has been pre-adjusted and calibrated. Therefore, it should be stored and transported in a separate box so that no mechanical loads from other objects are applied to it in transit. Do not drop, hit, overcool or overheat the meter.
Precautions
The meter is designed to measure the torque of rubber motors for F1D, F1L and F1M class models. Larger rubber motors may damage the device. Also, do not apply rotational loads to the meter's hook by hand. Torque applied by hand can exceed the load the meter is designed for by 10-100 times.
It is recommended to mount the device using the base included in the kit. Any other mounting method may, at best, lead to inaccurate measurements and, at worst, damage the meter.
The device screen can tilt within a range of about 45 degrees. Do not force the screen or try to turn it beyond the mechanical stops.