A device for measuring the force when stretching the rubber motor of F1D, F1M and F1L class models.
The dynamometer shows the force value in real time on a tilting display. The unit of measurement is grams.
How to use
Securely fasten the base with two screws to a fixed surface. This can be a table, a stand or a flight box. Carefully snap the device onto the base. Connect a power source, such as a power bank. Right after connecting the power, try not to move the device. This is necessary for the initialization to complete correctly. Once the screen shows a value close to zero, the device is ready to use.
Put one end of the rubber loop on the device hook. Then stretch the motor to a pre-marked distance. After stretching, the device will show the force at that distance. The screen tilt angle can be adjusted within a 45-degree range.
Transportation and storage
The device is a sensitive instrument that has been pre-adjusted and calibrated. Therefore, store and transport it in a separate box so that other objects do not put mechanical loads on it in transit. Do not drop, hit, overcool or overheat the meter.
Precautions
The device is designed to measure the force of rubber motors for F1D, F1L and F1M class models. Larger rubber motors may damage the device. Also, do not apply loads to the device hook by hand. Force applied by hand can be dozens of times greater than the load the device is designed for.
It is recommended to mount the device using the base included in the kit. Any other mounting method may, at best, lead to inaccurate measurements and, at worst, damage the device.
The device screen can tilt within a range of about 45 degrees. Do not force the screen or try to turn it beyond the mechanical stops.